Product Guide: All-in-One-Kit hidden

All-In-One Kit

All your Zippo essentials in one item

 

all in one kit


    Street Chrome Lighter:

    street chrome

    Case

    Standard case shape featuring rounded corners and top with a flat bottom.

    Hinge

    Hinge

    A five-barrel hinge joins the top and bottom.

    insert

    Insert

    Standard insert with 16 holes in the chimney (8 per side).

    bottom stamp

    Bottom Stamp

    Bottom stamp with Zippo logo from the period authenticates this lighter as genuine Zippo.


    Great for filling:

    Filling Insert with Lighter Fluid

    Windproof Lighters 

    When your windproof lighter is out of fluid, fill your windproof lighter with Zippo lighter fluid. Hold the lighter in one hand. Use the other hand to remove the insert. Fill slowly and never over fill. You can do this by lifting the felt pad to reveal the packing material in the fuel chamber. Saturate the packing with Zippo Lighter Fluid. Stop filling when fuel reaches top of the packing.

    Filling Zippo Hand Warmer Canister

    Hand Warmers

    To fill your hand warmer with lighter fluid,pour Zippo Lighter Fluid into the appropriate 6 or 12 hour plastic filling cup provided in the package. Then carefully and slowly pour the contents of the filling cup in to the filling hole on the Hand Warmer body, while maintaining the Hand Warmer in an upright position. 

    Filling a Fuel Canister

    Fuel Canisters

    Refill the fuel canister with Zippo premium lighter fluid when the canister is empty. 


    Genuine Flint Dispenser:

    zippo flint

    Includes 6 flints in each dispenser and fits all Zippo windproof lighters.


    How to Replace the Flint:


    Step 1

    First remove the insert from the lighter case.

    unscrew the wick

    Step 2

    Using a small screw driver or a coin, slowly remove the spring. The spring has tension so be sure it doesn't fly away.


    Step 3

    Remove the remaining piece of flint by gently tapping the insert against a hard surface. Once it is removed, use an unfolded paper clip to remove any stubborn flint slivers or residue from the flint tube.

    flint dispenser

    Step 4

    Insert a new flint into the flint tube.

    Step 5

    Replace the flint spring and turn clockwise until tight. If the screw isn't fully tightened the lid will not close.

    Step 6

    Step 6

    After fully tightening the spring you may want to keep extra flints under the felt pad so you always have them handy for future use.

    Step 7

    Step 7

    Put the insert back into the lighter case and make sure the lid can fully close. if the flint wheel binds, turn the wheel backwards a few times.