A precision blue flame mid-size torch suitable for various hobby and household projects. The air mixture control feature allows to change the flame to a lower temperature yellow flame. The MDX for is perfect for household projects including, but not limited to, soldering, heating, melting, thawing and glass bending.
The MDX Torch provides a high precision heat flame with the ability to adjust the intensity and size of the flame using the switch located on the side of the torch.
Air Mix Slide
Air mixture control allows the flame temperature to adjust from the 'hi-heat' blue flame to a lower temperature yellow flame. After igniting the torch, the flame type (blue to yellow) can be adjusted using the switch located on the top of the torch. Forward is blue, while back is yellow.
A child-resistant palm lock ignition and adjustable high precision flame settings create a safe environment.
Each Firefast™ Torch is packaged with a 18ml. canister of Zippo butane fuel, for one refill on us.
Open lid of the 18ml. butane canister and remove the additional red plastic prongs/adapters. Be sure to only use Zippo butane fuel.
Place the butane fuel nozzle into the filling valve, located at the bottom of the Firefast™Torch. Always refill in the position shown in Step 3.
Press white tip of the butane fuel vertically downward into the torch's fuel inlet valve on the bottom of the torch and apply firm pressure. Fuels in seconds. After filling, allow at least 2 minutes for the butane to stabilize before igniting.