Includes 6 flints in each dispenser
Compatible with all Zippo windproof lighters
First remove the insert from the lighter case.
Using a small screw driver or a coin, slowly remove the spring. The spring has tension so be sure it doesn't fly away.
Remove the remaining piece of flint by gently tapping the insert against a hard surface. Once it is removed, use an unfolded paper clip to remove any stubborn flint slivers or residue from the flint tube.
Insert a new flint into the flint tube.
Replace the flint spring and turn clockwise until tight. If the screw isn't fully tightened the lid will not close.
After fully tightening the spring you may want to keep extra flints under the felt pad so you always have them handy for future use.
Put the insert back into the lighter case and make sure the lid can fully close. if the flint wheel binds, turn the wheel backwards a few times.